109920 Stanley Multi-Code Receiver, 300MHz


The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used. The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals. The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.


  • Category: Receivers
  • SKU: SRO-109920, MCS109920

Price:$59.99


BUY NOW!

Description

109920, MCS109920 Multi-Code Gate Receiver

Receiver Information: 300MHz Operating Frequency

  • The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications.
  • An 11-inch wire whip antenna is included for local reception.
  • The whip antenna connects to the receiver's Type-F antenna connector. 
  • If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used. 
  • The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet.
  • The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals. 
  • The receiver is programmed with a 10-position coding switch.
  • When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
  • Part Number: MCS109920
  • Operates on 115 VAC power
  • Use for one garage door or gate operator
  • Whip antenna Included
  • Codes: 1,024 (set by dip switches)
  • RF frequency: 300 MHz
  • Dimensions: 3.625" W x 5.25" H x 1.5" D